Acrylic Shopping Cart: A Handy Desktop Snack Organizer
naught
- August 6, 2024
*All images are original creations by the author. Please do not use them for any purpose without authorization!
This is quite a practical little gadget that can be used to store small snacks or stationery on your desktop.
The assembly is somewhat challenging and requires the following acrylic parts:
- 2 main bodies
- 8 wheels
- 1 front panel
- 1 rear panel
- 1 bottom panel
In addition to these, you’ll need accessory parts:
- 2 connecting rods (2 cm each)
- 8 washers
In the simplest case, you need to prepare four essential images:
- One image of the main body
- One image of the wheels
- One image of the front and rear panels
- One image of the bottom panel
These four images are indispensable.
Beyond this basic setup, you can make it more complex, for example by having two main body pieces with different designs or varying designs for the front and rear panels.
Drilling holes in the main body can be a bit tricky: you need to create three base holes on the left, right, and bottom using a flexible drill component. The wheels need two 5mm round holes drilled into them. The front and rear panel connectors and the bottom panel connectors should be aligned as shown in images 2 and 3 for proper assembly.
For the wheels, simply place the washers between two wheels and connect them using the connecting rods.
-
DIY Design Acrylic
$0.99+
